Efinix Titanium Ti180 M484 User Manual Download Page 56

Page: 56 / 60

Titanium Ti180 M484 Development Kit User Guide

Attaching the Ethernet Connector Daughter

Card

The Ethernet Connector Daughter Card attaches to the multi-purpose QSE connector on

the FMC-to-QSE Adapter Card. The HDMI Connector Daughter Card cannot be attached

directly to the Titanium Ti180 M484 Development Board.

Figure 16: Attaching Ethernet Connector Daughter Card

Power

Supply

FMC-to-QSE

Adaptor

Ethernet

Connector

Daughter

Card

Ethernet

To connect a daughter card:

Install standoﬀs

and screws on the FMC-to-QSE Adapter Card and Ethernet Connector

Daughter Card.

Connect the Ethernet Connector Daughter Card to the FMC-to-QSE Adapter Card.

Install the nuts on the FMC-to-QSE Adapter Card.

Ensure the power supply and board power switch are turned oﬀ, then connect FMC-to-

QSE Adapter Card to the Titanium Ti180 M484 Development Board.

Install the nuts on the Titanium Ti180 M484 Development Board.

Connect the Ethernet cable to the Ethernet Connector Daughter Card.

www.efinixinc.com

Summary of Contents for Titanium Ti180 M484





























































Search results

Summary of Contents for Titanium Ti180 M484

Reviews:

Related manuals for Titanium Ti180 M484

Brands by name

Popular brands

Efinix Titanium Ti180 M484, User Manual

Search results

Summary of Contents for Titanium Ti180 M484

Reviews:

Related manuals for Titanium Ti180 M484

Brands by name

Popular brands