Efinix Titanium Ti180 M484, User Manual

Page: 41 / 60

Titanium Ti180 M484 Development Kit User Guide
Header J1 (Optional Camera Signals)
J1 is a 12-pin header that has optional pins (SCL and SDA) used for MIPI Camera Command
Set (CSS) transactions. These signals are routed to the FPGA on the board. You can control
these pins with an external device by removing the jumpers and connecting wires from the
header to an external device. The header controls the settings for both cameras, but each
camera has the dedicated pins shown in the following table.
Table 27: J1 Pin Assignments
Pin
Number
Pin Name Description Pin
Number
Pin Name Description
1 SCL_0 I
2
C signal for FPC2 2 CAM_SCL_0 I
2
C signal for FPC2
3 SDA_0 I
2
C signal for FPC2 4 CAM_SDA_0 I
2
C signal for FPC2
5 EN_0 Camera GPIO for FPC2 6 CAM_EN_0 Camera GPIO for FPC2
7 SCL_1 I
2
C signal for FPC1 8 CAM_SCL_1 I
2
C signal for FPC1
9 SDA_1 I
2
C signal for FPC1 10 CAM_SDA_1 I
2
C signal for FPC1
11 EN_1 Camera GPIO for FPC1 12 CAM_EN_1 Camera GPIO for FPC1
www.efinixinc.com 41