Efinix Titanium Ti180 M484 User Manual Download Page 53

Page: 53 / 60

Titanium Ti180 M484 Development Kit User Guide

Ethernet Connector Daughter Card

The Ethernet Connector Daughter Card adds Ethernet connectivity to the development

board. The Ethernet Connector Daughter Card has a Gigabit Ethernet transceiver from

Realtek (part number: RTL8211FD-CG) which is compliant with 10Base-T, 100Base-TX, and

1000Base-T IEEE 802.3 standards.

Learn more:

Refer to the

Ethernet Connector Daughter Card Schematics and BOM

for the part details

and schematics.

Figure 15: Ethernet Connector Daughter Card

Top

Bottom

Warning:

The board can be damaged without proper anti-static handling.

Features

•

Realtek RTL8211FD-CG transceiver

•

Single-port RJ-45 connector with integrated magnetics and LEDs

•

Power supplied from the development board; no external power required

Headers

Table 38: Ethernet Connector Daughter Card Headers

Reference Designator

Description

RJ1

RJ-45 Ethernet connector

40-pin QTE connector bringing GPIO signals and power from the development

board.

www.efinixinc.com

Summary of Contents for Titanium Ti180 M484





























































Search results

Summary of Contents for Titanium Ti180 M484

Reviews:

Related manuals for Titanium Ti180 M484

Brands by name

Popular brands

Efinix Titanium Ti180 M484, User Manual

Search results

Summary of Contents for Titanium Ti180 M484

Reviews:

Related manuals for Titanium Ti180 M484

Brands by name

Popular brands