EFI Fiery E300, Configuration And Setup, Page: 8 / 66

The following documentation resources are available for the Fiery
®
E300 Color Server.
Resource Description
User documentation Documents in this set: Color Printing , Configuration and Setup , Fiery Productivity Package ,
Printing , Utilities
Online help
•
Help can be accessed directly from each Fiery application or by going to help.efi.com .
•
Each help system is available as a printable PDF, accessed from the PDF icon in the upper right
corner of the Help window.
Additional reference
material
•
Fiery Color Reference - help.efi.com/ref/colorref/en-us/
•
Variable Data Printing - help.efi.com/ref/vdp/en-us/
•
Workflow Examples - help.efi.com/ref/workflows/en-us/
•
Configure Help - help.efi.com/configure/3.0/en-us/
General precautions for working with the E300
Always observe the following general precautions to assist with personnel safety and prevent data loss or equipment
damage.
Warning:
Do not store or use flammable sprays or solvents near the E300 or the printer. Components within
these machines can operate at a high enough temperature to provide an ignition source. Storing or using
flammable items near these machines could cause the items to catch fire or explode.
Warning:
Never set any liquid on or near the E300 or the printer. Spilling liquids into either machine could
result in electric shock and damage the machine. If liquid is spilled on or underneath either machine, or any
object falls into either machine, disconnect the corresponding power cable immediately, if safe to do so.
Warning:
Do not remove the covers or otherwise open the E300 hardware. Cables and parts inside the chassis
are intended to be serviced by technical support only.
Warning: Ensure that the power cabling remains as configured by the service technician. The designated power
cable and a grounded, correctly rated outlet must be used. If required, the cable should be protected by a surge
suppressor, line conditioner, or uninterruptible power supply (UPS).
Warning:
Do not allow the power cords or cables to be compressed or bent at a sharp angle. Arrange them so
that no one might accidentally step on or trip over them.
Caution:
Do not block the vents on the E300 or otherwise restrict airflow. Leave clearance around all vents and
ensure that nothing falls into the vents.
Caution:
Do not make mechanical modifications to the system. The safety and regulatory compliance of
modified equipment cannot be guaranteed.
Configuration and Setup
Introduction
8