Performing initial setup with the Fiery Setup
Wizard
Fiery Setup Wizard provides a quick, easy way to perform initial setup of the E300.
You can use the wizard to select a predefined configuration based upon your print environment.
Factory default settings on the E300
The E300 ships with factory default settings. These settings remain in effect until the Fiery Setup Wizard is used to
select a predefined print environment, or until the settings are modified through Configure.
To see the factory default settings, review the configuration settings before you complete the Fiery Setup Wizard.
The settings described in this document are listed with the factory default values.
Fiery Setup Wizard workflow
The selected predefined configuration is implemented only when you click
Finish
at the end of the wizard. You can
also choose to skip selecting a predefined configuration, which retains the factory default settings.
Once you click
Finish
, the wizard is no longer available in either Command WorkStation or WebTools. The wizard
becomes available again only if you reinstall the system software.
Selecting a predefined configuration may change user access or modify how print functions work. If you see
unexpected results, review the settings in Configure.
Using the Fiery Setup Wizard does not affect your ability to use Configure. After completing the wizard, you can still
view and customize individual settings in Configure or through the Setup feature on the printer control panel.
Predefined configurations
Each predefined configuration includes settings that are typically required for a specific type of printing
environment.
Since the list of settings is extensive, Fiery Setup Wizard does not list the settings included in each predefined
configuration. To review individual settings, access Configure as described in this document.
Configuration and Setup
Performing initial setup with the Fiery Setup Wizard
22