29
28
effigis.com
CPAT FLEX
User Manual (ARD4)
CPAT FLEX
User Manual (ARD4)
4.3 DRV3 Lite Installation
When used with an ARD4, the DRV3 Lite will connect to it using the USB connector. In this
mode the user will view RF level of the fault found on the DRV3 Lite screen.
See user guide manual (Leakage Detector Operation Manual) for more information regarding
the DRV3 Lite standalone installation.
NOTE
• As soon as the DRV3 Lite is plugged and the ARD4 PWR LED indicator is
green, the ARD4 will take full possession of the DRV3 Lite’s functionalities
and DRV3 Lite menu should not be accessed.
• You can plug the DRV3 Lite to the ARD4 even if it is powered OFF.
4.4 DRV3 Installation
The DRV3 can be connect to ARD4 through a docking station providing power and data
connections. In this mode the user will view RF levels of the faults founds in frequency agile
from 118 to 140 MHz (Mid band tuner) and 572 to 960 MHz (LTE band tuner) on the DRV3
screen.
See user guide manual (Leakage Detector Operation Manual) for more information regarding
the DRV3 standalone installation.
4.5 ITX2 Installation
The ARD4 and the ITX2 will connect using a USB connector. When connected to the ARD4
via the USB cable, the ITX2’s buttons are automatically disabled, except for the Power button.
In this mode the user will view RF level transmitted in the screen. The ITX2 module must be
used in conjunction with the IRX1 ingress monitoring system installed in the headend.
