UPS RMH700/1000/1500
Instruction Manual
RMH Series
Page 14 of 37
6 RMH700/1000/1500 – description of equipment
In this chapter, you will be introduced to the various elements of the equipment
and will be provided with instructions on its operation as well as all information
on equipment connections.
6.1 Display and operator control elements on the front panel
Fig. 2:
Front view
RMH700/1000/
1500
All of the operator control and display elements required for normal operation
are positioned on the front of the equipment.
6.1.1 UPS operator control elements
Fig. 3:
Display and
operator control
panel for
RMH700/1000/1500
UPS "ON/OFF" switch:
(3-way
function)
by pressing the button (hold down for approx. 2 seconds) when the UPS is
switched off, it is switched on. (LEDs flash)
If the UPS has already been started and the button is pressed again (one-
touch operation), the UPS switches to “test” operation. (Line LED goes out).
by pressing the button (hold down for approx. 2 seconds) when the UPS is
switched on, the UPS is switched off (LEDs go out).
Warning: The equipment will not be completely started or switched off if the
“ON/OFF” button is not pressed for a sufficient amount of time.
Providing the mains power supply remains on via the fuse (positioned at the
rear of the UPS), the charging unit also continues to operate even after the
UPS has been switched off.
