A
B
eN
NUVOLA TOUCH OperATiNg ANd mAiNTeNANCe mANUAL
32
The data and features referred to are not binding on EFFEGIBI and the company reserves the right to make any appropriate changes without having to give prior warning or replace this manual.
4.1
STArT-Up SeQUeNCe USiNg THe CONTrOL pANeL
The purpose of the start-up sequence is to synchronise all the installed elements (generator, control panel,
lighting).
Once this sequence has been run, all the functions of your Hammam/Turkish bath will be easy to run from the
control panel.
The start-up sequence needs only be repeated after additional optional EFFEGIBI features have been added
at a later date.
Make sure that the steam generator is connected to the electricity and water supplies and remove the adhesive
film on the panel.
If there is also a second optional external panel, the start-up sequence only has to be performed on the
panel inside the Hammam.
Switch on the panel by pressing the “ON/OFF” button (
Fig. A
).
fig. A
Press the temperature controls, buttons “C” and “A”, firmly and in rapid succession, and they will glow
brighter, and then the “ON/OFF” button. In
Fig. C
the sequence is shown as numbers“1”, “2” and “3”.
The “ON/OFF” button (shown as number 3) must be pressed firmly for a few seconds until all the control panel
buttons have been flashing for a few seconds.
The panel will display all the icons with a dim light.
Buttons A and B, the maintenance signal and the EFFEGIBI logo will appear with a brighter light (see
Fig. B
).
fig. B
MANUALE USO NUVOLA TOUCH.indd 32
27/02/2014 14:28:04
