Digital Time, Air Pressure and
Vacuum Pressure LCD Display
• Programmable floating decimal provides time range
readout from 0.001 to 99.99 seconds.
• Air pressure readout can be programmed in either
psi or bar.
• Vacuum pressure readout is displayed by holding
the vacuum toggle switch in the "up" position.
Memory
Can store up to eight Time settings. (See page 20.)
Run/Setup
1. The
RUN
mode allows access to all eight cells. Cell
numbers are displayed as
CEL1
,
CEL2
...
.CEL8
. Chang-
ing the cell number will change the time setting corre-
sponding to that cell.
The
SETUP
mode provides access to selected cell
TEACH
and
TIME SET
functions. Only in the
SETUP
mode
can cell time values be viewed, cleared, or changed.
2. In the
RUN
mode, the functions are inoperative.
Steady/Teach
In
SETUP
mode, pressing
STEADY/TEACH
will clear
the currently displayed cell setting, reset the cell
display to blinking "
0000
", and place the dispenser
in a
TEACH
mode (refer to page 12 for
TEACH
procedures).
In
RUN
mode, pressing
STEADY/TEACH
will override the
timer and dispense for as long as the foot pedal is
pressed. The dispenser display will read "
----
" in the
STEADY
mode.
Time Set
▼
(down)
▲
(up)
In
SETUP
mode, use the
TIME SET
buttons to change
time settings. Left buttons scroll digits quickly; right
buttons scroll digits slowly.
Pressure/Time
Press to change display values from
TIME
to
PRESSURE
or
PRESSURE
back to
TIME
.
In
SETUP
mode, pressure readings may be changed
from PSI to BAR and BAR to PSI by pressing and
holding the
PRESSURE/TIME
button for four seconds.
STOP
This button stops the dispenser immediately.
Barrel Vacuum Contro
l
Refer to page 16 for operation.
Air Pressure Regulator
Refer to page 11 for operating instructions.
STEADY
RUN
SETUP
CYCLE
STOP
Run
Setup
Fast
Slow
Time Set
Pressure
Time
Fast
Slow
Time Set
Pressure
Vacuum
Steady
Teach
Cell Select
E
L
1
C
Vacuum
Pressure
®
A NORDSON COMPANY
2000XL
Function
Indicator
Lamps
Air pressure
regulator
Barrel vacuum
control
Vacuum
toggle switch
Features and Controls