If you have any questions at this point, please call us now.
In the US, call 800-556-3484
(Between 8:30 am and 6:00 pm eastern time.)
In Mexico, call 001-800-556-3484.
In the UK, ring free 0800 585733.
☎
Don’t Forget!
✓
Changes to the time settings can be
made only when the mode of operation
is
SETUP
.
✓
RUN mode locks out
TIME SET
and
TEACH
control buttons. Use this to protect the
setup from inadvertent changes.
✓
Pressing
STEADY/TEACH
in
SETUP
mode
will clear all time settings within cell.
✓
STOP
immediately terminates the current
dispense cycle.
✓
Use only dry, clean, filtered air.
Note:
The pedal needs only to be pressed mo-
mentarily. The complete time cycle will run once
the dispenser is initiated.
Press
RUN/SETUP
and toggle back to the
SETUP
mode. Press the
TIME SET
buttons and change
the time to 2.30 seconds. Go back to
RUN
, press
the foot pedal, and the dispenser will make a
deposit approximately twice the size of the first one.
Pressure—changes deposit size.
The dispenser should be in the
RUN
mode, the
TIME
setting should be 2.30 seconds and the
dispensing pressure should be 20 psi (1.4 bar).
Increasing the pressure will result in larger depos-
its, decreasing the pressure will result in smaller
deposits. Try this now and observe the results.
Tip Size—changes deposit size.
Tip size also affects deposit size. Without chang-
ing the
TIME
or
PRESSURE
setting, try different tips
and observe the results.