Efco TPC-5215, User Manual

Page: 27 / 71

16
Embedde
d
Sy
st
em
T
ouch P
an
el
PC
TP
C
-5
2
1
5
Photo_17 – Jumper setting
2.4 Hardware Install and Upgrades
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
1.
Unplug the power cord from the wall socket before touching any component.
2. To avoid damaging the motherboard components due to static electricity, NEVER
place your motherboard directly on the carpet or the like. Also remember to use a
grounded wrist strap or touch a safety grounded object before you handle
components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded antistatic pad or
in the bag that comes with the component.
Before you install or remove any component, ensure that the power is
switched off or the power cord is detached from the power supply.
Failure to do so may cause severe damage to the motherboard,
peripherals, and/or components.
Do not over-tighten the screws! Doing so may damage the screw hole
and device.
2.4.1 Memory Module (SO-DIMM) Installation
1. Before installing any device, please make sure that the power supply is switched
off or the power cord is unplugged.