EFA SL24 WB Spare Parts List And Instruction Manual Download Page 10

Printed in Federal Republic of Germany   12.2001 

Änderungen vorbehalten  

Copyright by EFA 

 

- 10 -

 

 

Warning! 

When changing tools and before cleaning 

or carrying out maintenance and repair work 

disconnect from the mains 

3. Maintenance 

Disconnect machine from the mains. After use, the saw must be fully rinsed, in order to satisfy 
the hygienic requirements. 

During every maintenance check, the seal (49) on the handle and switch plate (42) must be 
examined to see if they function properly. 

Every 50 hour of Operation the machine must be maintained by lubricant (61) and with 3 
squirts from the grease gun. 

Lubricant: EFA special grease (0.8 kg). Order No. 001 365 613. 

 

Changing of Saw Blades: 

Disconnect plug from socket, unscrew both hexagon nuts (82) with ring open-end wrench, 
remove hexagon screws (84) and saw blade (77) with Z-clamp (83). Assembly proceeds in 
the reverse order. 

 

4. Changing of Carbon Brush 

4.1 Automatic Cut Off 

If the carbon brushes (28) are worn out, the automatic cut off breaks the power supply and the 
machine comes to a standstill. Through this the runnihg control of the carbon brushes (28) is 
cancelled and the collector of the armature can not be damaged by the brush spring. 

4.2 Note 

WARNING! First pull the plug out of the socket. The carbon brushes (28) may only be 
changed in pairs. 

Summary of Contents for SL24 WB













Reviews: