EF JOHNSON 5100 ES II, Operating Manual

Page: 113 / 144

December 2006 5100 ES Model II/III Portable Radio Operating Manual 7-7
Miscellaneous
7.3 System Operator Programming
As noted several times in this manual, programming determines the availability and
specific operation of many features. This usually refers to the programming performed by
the PC Configure programmer when the radio was set up, not to any programming a user
can perform. If a feature is controlled by a front panel option switch and that switch is not
available, it is probably not available.
If the Keypad Programming option switch is available, you can reprogram some
conventional channel parameters. Refer to Section 5.15 for more information.
7.4 Speaking Into Microphone
For best results, hold the radio about 1-2 inches from your mouth and speak at a normal
conversational level. Do not shout since it distorts your voice and does not increase range.
Make sure that the PTT (push-to-talk) switch is pressed before you begin to speak and
released as soon as the message is complete.
7.5 Operation At Extended Range
When approaching the limits of radio range, the other party may not be able to hear your
transmissions and there may be an increase in background noise when messages are
received. You may still be out of range even though you can hear a message. The reason
for this is that the signal you are receiving is usually transmitted at a higher power level
than the one transmitted by your radio. Communication may be improved by moving to
higher ground or away from shielding objects such as tall buildings or hills.
7.6 Licensing
A government license is usually required to operate this radio on the air.
7.7 Radio Service
If the radio is not responding to any key presses, the keypad may be locked. Refer to
Section 3.6 for more information.
If “Password” is briefly displayed when power is turned on and you are prompted to enter
a password, the Power-Up Password feature is enabled. Refer to Section 3.2 for more
information.