EF JOHNSON 5100 ES II, Operating Manual

Page: 58 / 144

4-10 5100 ES Model II/III Portable Radio Operating Manual December 2006
Radio-wide Features
SMARTNET/SmartZone and Project 25 Trunked Channels - Each channel (talk group)
can be programmed so that one of the programmed lists is selected or scanning is disabled
(No List). In addition, channels can be programmed so that scanning is automatically
enabled (Auto Scan) when they are selected.
If the Scan (List) Select option switch or menu parameter is programmed, the list that is
selected by all talk and announcement groups in the current system can be temporarily
changed by the user as follows. “No List” (scanning disabled) or “Programmed” (default
list) can also be selected if desired. The programmed default scan list is automatically
reselected on power up.
To change the currently selected scan list (all channel types), proceed as follows:
1
With scanning disabled ( icon not displayed), press the Scan List option switch or
select the Scan Selct menu parameter.
2
The currently selected list is displayed as “List x”, where “x” is the currently selected
list. To exit without changing the selected list, simply press the Scan List option switch
again or the <
F1 > key.
3
To select another list, press the Up/Down switch. When the desired list is displayed,
select it and exit this mode by pressing the Scan List option switch again or the <
F1 > or
< F2 > key.
4.10.1.3 Editing a Priority Scan List
If the Scan Edit option switch or menu parameter is programmed, conventional,
SMARTNET/SmartZone, and P25 Trunked priority (standard) scan lists can be user
programmed. Changes are permanent (cycling power does not reselect a default
condition). Proceed as follows:
1
Make sure that both priority and radio wide scanning are off ( icon not displayed).
Select a conventional or SMARTNET/SmartZone/P25 Trunked channel corresponding
to the scan list being programmed.
2
Select the scan edit mode using the Scan Edit option switch or menu parameter. This
mode is indicated by
in the display.
3
If applicable, select the list to be edited by pressing the Up/Down switch. Select the
desired list by pressing the <
F2 > key. The selected list is indicated as “List x”. If user
programming is disabled on a list, (conventional only) “No Edit” is momentarily
displayed and it cannot be edited.
4
Select the channel you want to add or delete by pressing the Up/Down switch. After the
last channel in the current zone is displayed, the first valid channel in the next zone is
displayed and vice versa. Lists are limited to 512. If an attempt is made to add more
than 512, “List Full” is displayed and a channel must be deleted before another can be
added.