EEZ RV EezTire E518, Manual, Page: 17 / 35

17
hold the + button for 3 seconds. The monitor will enter sleep mode to
conserve battery life if the motion sensor does not detect motion for
15 minutes. It will come back to operating mode when it detects the
vehicle is moving again or other motion.
Temporarily Remove Towing Vehicle or
Towed/Trailer Image from Screen
To drop the image of the towing vehicle from the screen press and
release the LINK and + key at the same time. To display it back on the
screen press and release the LINK and + key at the same time again.
(This will allow you to use the system in your towed when not
connected to the coach.) To drop the image of the towed
vehicle/trailer from the screen press and release the LINK and - key at
the same time. To display it back on the screen press and release the
LINK and - key at the same time again.
Charging the Monitor
The lithium-ion battery inside the monitor, when fully charged can
run for up to 60 hours between charges. When the battery symbol
bars are gone, a recharge is required.
OUT OF PARAMETER ALERTS