EEZ RV EezTire E518, Manual, Page: 15 / 35

15
for cell phones on their dash.
1. mount it onto the windscreen or left side window using the
suction cup provided ensuring you do not obstruct the driver’s vision
of the road. 2. Plug the power adapter into the cigarette lighter or
auxiliary power outlet and connect the power cable to the monitor.
Ensure the pin is aligned straight when inserting it into the right side
of the monitor. When hard wiring it is recommended using a “keyed”
power source.
Metal Triangle Mount Bracket If the bracket is needed, please follow
the instructions below. Be sure not to obstruct th
e driver’s vision
when the monitor is installed.
SENSOR INSTALLATION
1. Remove the tire valve cap and mount the corresponding sensor on
the valve stem using the wrench provided.
2. wrench provided.
3. Simply screw the wrench clockwise.
NOTES:
1. If you have trouble getting the wrench into the location, you can
unscrew the two halves of the
Anti-Theft housing keeping the bottom part of the housing in place on
the sensor and screw the
sensor onto the valve stem by hand. Once the sensor is in place, pull
the lower part of the housing
up and screw the top half of the Anti-Theft housing onto it. The Anti-
Theft housing will now spin
when turned on the sensor. The reverse can be done to remove if
necessary.
2. If you do not need the Anti-Theft function, you may remove the
Anti-Theft cover by just