4. Program the alarm parameters using
STEP 1: SETTING YOUR SYSTEMS
ALARM PARAMETERS
5. Program each sensor to the monitor using
STEP 2: PROGRAMMING
SENSORS TO THE MONITOR
STEP 1: SETTING YOUR SYSTEMS ALARM PARAMETERS
Refertothediagramonthe/astpageofthismanualwhereyouwrotethesensornumberforeach tire.
1. Next to each axle write down what your tire pressure is by axle and calculate
what your alarm setting will be.
2. High-Pressure setting will be (200/4 above axle tire pressure).
3. Low-Pressure setting will be (1 QOJb below axle tire pressure).
Example: Front Axle lire Pressure is: 100 psi
High-Pressure Alann Setting will be: 120 psi (100 psi x 1.20 (or 20%) = 120
Low-Pressure Alarm Setting will be: 90 psi (100 psi x .9 (or 90%) = 90
These are industry standards for the initial set-up, some adjustment may be
needed after your first trip. Every brand of tire operates differently, when
some brands reach operating temperature the psi will increase 5 psi, other
brands may increase 20 - 22 psi. During your first trip, you will see if you need
to increase your High-Pressure Alarm setting. For the temperature, it is
recommended leaving it at the factory default of 158 degrees F.
STEP 2: Choosing Pressure and Temperature Unit of Measure
1. Press the
SET
button and hold it until you hear
the beep. You will first see PSI
or BAR (for metric) in the first window. Use the + or - key to scroll between the two.
When the one you want to use appears in the screen press and release the SET
button. (Pressing and releasing the SET button in this mode is like saying yes to
what the
screen is showing
you)
lffiiI:
cc
-
------
------
lffiiC
cc
-
------
------
2. It will automatically move to the next window which will show you
°
F
(Fahrenheit) or
°
C (Celsius) for the degree setting in the second window.
Use the + or - key to scroll between the two. When the one you want to
use appears in the screen press the
SET
button and release.
Press the set button again and
"
°
F"
will be flashing. Press+ o r - to change to "
0
C"
if you like. The next time that you press the set button the front axle will be
flashing and the words "HIGH PRESSURE" will be displayed. Follow the
instructions below.
- - - - - - - - - - - - -
09 - - - - - - - - - - - - -