DE285 HD Caption Decoder/VANC Monitor
5.7.2.
Alarm/Error Configuration
The middle section of the OSD tab allows the user to set the alarms
and errors for OSD display. An explanation of setting these alarms and
errors can be found in Section 5.6.2 .
Note: Alarms set in this manner will show up on the OSD and in log.
5.7.3.
Audio Monitor Configuration
The lower section of the OSD tab allows the user to customize the map-
ping of audio channels to the audio monitor. Using the four dropdown
lists, you can select which audio channel pair you would like to map to
which audio monitor pair. Below these dropdown lists you can specify
a clip level in decibels in the range of 0 to -60 dB. To put changes into
effect, click the
Apply
button at the bottom of the screen.
5.8.
Settings
The Settings tab contains several subsections that allow the user to cus-
tomize various aspects of the 285 website and screen configuration.
5.8.1.
Upgrade
The Upgrade subsection provides an easily accessible way to update the
firmware that comes pre-installed on the DE285. The DE285 can be
upgraded through the USB front panel as discussed in the System Setup
Menu section or the upgrade can be performed through the website.
Begin by downloading the most recent firmware update file from the
EEG website or from the ’Download DE285 Upgrade’ link on the website
and saving it to a location on your computer. After downloading the
firmware upgrade, click on the
Browse
button to the right of the File
36
Copyright ©2009-2011 EEG Enterprises, Inc.
All rights reserved.
