MaxLoader User’s Guide
17
NOTE: Watch the model name in left-up corner screen and the ProMax-
4G(8G) won’t be ready if “DEMO mode” appears in the screen. Check the
USB cable and turn on the AC switch in the back side of unit.
To install the Software for parallel port programmers
There are three different addresses for the parallel port. When you select an
address from LPT1, LPT2, LPT3, one of them should be valid without a
communication error message. Turn the AC switch ON before running the
MaxLoader software. Make sure you connect the printer (IEEE) cable between
TopMax/ChipMax and your available printer port and lock the shields in each
side of the cable. Be sure that your programmer recognizes your computer’s
parallel port address when you execute the MaxLoader icon. (MEMO mode is
indicated that your programmer has a “communication error”)
1. Connect print cable between PC and programmer.
2. Connect AC cord to programmer.
3. Turn on AC switch located on the back side of TopMax
4. Install programmer software that comes in a CD-R (or download the latest
software (all-in-one) from www.eetools.com
5. After the MaxLoader is installed, you choose a programmer name in the very
first screen menu
To download the software from the
www.eetools.com
web site
1. Click on “Software download” button on left at www.eetools.com and
download MaxLoader software. The file will be saved to your hard disk. The
MaxLoader can be operated for All-in-one (all programmers-in-one software).
2. Once the download is complete, double-click on the file name to install the
software.
