CAUTION: PUMP LIFE
Risk of damage to equipment. Unpack the pump carefully and avoid excessive shock
to the pump. Excessive shock will damage the bearings and reduce the life of the
pump.
Refer to
for the mass of the pump.
The pump is supplied in a recyclable packaging.
1.
Open the cardboard box from the top.
2.
Remove the packing material. Keep all the packing materials for use in inspection
and if the pump is returned for service.
3.
Examine the pump for damage. If the pump is damaged, notify your supplier and
the carrier immediately. Give the supplier and the carrier the information that
follows:
▪
part number of the pump
▪
serial number of the pump
▪
order number
▪
supplier's invoice number
4.
Do not use the pump if the pump is damaged.
5.
If the pump is not to be used immediately, store the pump in the conditions given
in
on page 45.
6.
The pump is supplied with sealed inlets and outlet to prevent the entry of dust and
vapor. Do not remove the seals until the pump is ready to be installed on the
vacuum system.
4.3 Mechanical installation
WARNING: HEAVY OBJECT
Risk of physical injury. Use suitable equipment to lift the pump.
WARNING: LOOSE CABLES/PIPEWORK
Tripping hazard. Make sure that any cables and/or pipe work attached to the pump
are fixed carefully to avoid a slip/trip hazard and to prevent any damage to the cable.
WARNING: LIFTING EYE INTEGRITY
Risk of injury or damage to equipment. Make sure that the maximum angle between
the paired slings used to lift the system is 45 degrees. Increased angle could
compromise the lifting eye integrity.
05/2021 - ©Edwards Limited
Page 20
A90301880_C
A90301880_C - Installation