Edwards nXDS10i nXDS15i, Instruction Manual

Page: 53 / 58

Note:
If connecting the exhaust filter onto the pump outlet, an NW25 / hose nozzle, C10514328
is available to connect onto the outlet of the dust filter.
Table 20
Inlet/exhaust filter
Product description
Ordering information
Inlet/exhaust filter NW25/NW25 A50597805
9.2.6 Exhaust nozzle
The exhaust nozzle screws into the outlet flange. Use the exhaust nozzle to connect the
pump to the 12 mm internal diameter plastic hose.
Table 21
Exhaust nozzle
Product description
Ordering information
Exhaust nozzle A50509000
9.2.7 Chemical resistance conversion kit
This adaptor kit allows a standard nXDS pump to be converted into an nXDS
‑
C version.
This conversion may be necessary if the pump is used on applications involving corrosive
substances. For more information, contact us.
Note:
If returning the pump to us for repair or service having been converted from a standard
version to an nXDS
‑
C version, our service must be informed, otherwise the pump will be
returned back as a standard version.
Table 22
Chemical resistance conversion kit
Product description
Ordering information
Chemical adaptor kit for nXDS 6i, 10i or
15i
A73501807
Chemical adaptor kit for nXDS20i A73501808
9.2.8 Electrical cables
Refer to Table: Electrical cables on page 51 . The following electrical cables are available
as accessories and should be used to connect the nXDS pump to the electrical supply.
Table 23
Electrical cables
Product description
Ordering information
Lead Assembly, 10 A, C13, UK A50505000
Lead Assembly, 10 A, C13, Europe A50506000
Lead Assembly, 10 A, C13, USA A50507000
Lead Assembly, 10 A, C13, No Plug A50508000
Page 51
A73501880_G - Spares and accessories