background image

9.2.1  Silencer

A silencer is available for the nXDS pump. Refer t

Connect to the vacuum system on

page 28

 for guidance on its use.

Table 17

Silencer

Product description

Ordering information

Silencer NW25

A50597000

9.2.2  Gas ballast adaptor

A gas ballast adaptor may be fitted in place of the gas ballast control on the pump. The

adaptor allows a controlled supply of inert gas to be connected to the pump.
Gas ballast adaptor

Product description

Ordering information

Gas ballast adaptor with fine restrictor

A73501809

Gas ballast adaptor without fine restrictor

A73501811

9.2.3  Gas ballast adaptor blank

This adaptor kit allows the conversion of a standard nXDS pump into an nXDS

R version.

The gas ballast control is replaced with a blank adaptor so that the gas ballast cannot be

accidentally opened. This feature is useful for applications such as rare gas recirculation

or gas recovery. Another advantage is improved leak tightness at this location.

Table 18

Gas ballast blank adaptor

Product description

Ordering information

Gas ballast blank adaptor

A73501806

9.2.4  Vibration isolators

Fit vibration isolators to the pump to reduce the transmitted vibration from the pump to

a structure, such as a frame or a system.

Table 19

Vibration isolators

Product description

Ordering information

Vibration isolators (pack of 4)

A24801441

9.2.5  Inlet/exhaust filter

The inlet dust filter has two functions. It can be connected inline between the pump

inlet and your chamber outlet connection to prevent dust from migrating into your

system. Alternatively, it can be connected inline between the pump exhaust and your
exhaust extraction system. The filter is supplied ready to use with a 5 

m

m element.

Page 50

A73501880_G - Spares and accessories

Summary of Contents for nXDS10i nXDS15i



























































Reviews: