Edwards nXDS Series, Instruction Manual, Page: 8 / 32

A735-01-840 Issue B
Page 2 © Edwards Limited 2013. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Introduction
1.2 Installation and operation safety
Before installing the accessory:

Switch off the nXDS pump and wait until the pump has stopped rotating.

Isolate the pump controller from the electrical supply.
1.3 Unpack and inspect
Remove all packing materials and check the accessory. If it is damaged, notify the supplier and the carrier in writing
within three working days; state the item number of the accessory together with the order number and the suppliers
invoice number. Retain all packing materials for inspection. Do not use the accessory if it is damaged.
Check that the packaging contains the items shown in the Checklist of items table. If any of the items are missing,
notify the supplier in writing within three working days.
1.4 Disposal of accessories
Dispose of the used accessories and accessory spares safely in accordance with all local and national safety
environmental requirements.
1.5 Spares and accessories
Edwards products, spares and accessories are available from Edwards companies in Belgium, Brazil, Canada, France,
Germany, Hong Kong, Italy, Japan, Korea, Switzerland, United Kingdom, U.S.A, and a worldwide network of
distributors. The majority of these centres employ service Engineers who have undergone comprehensive Edwards
training courses.
Order spare parts and accessories from the nearest Edwards company or distributor. When ordering, please state for
each part required:

Model and Item Number of the equipment

Serial number (if any)

Item Number and description of part.
WARNING
Use the procedures described in this manual to install the accessory. Obey all safety instructions
and take note of all appropriate precautions. If not, damage to the accessory or other equipment
and injury to people can result.
WARNING
The user of the nXDS pump system is responsible for the safe operation and monitoring of the
system.
WARNING
Before installing the accessory, ensure the pump is off and the controller is isolated as described
below.