© Edwards Limited 2013. All rights reserved.
Page 25
Edwards and the Edwards logo are trademarks of Edwards Limited.
Pump-to-controller cable
A735-01-840 Issue B
9
Pump-to-controller cable
9.1
Description
The control cable is used to connect the nXDS pump directly to the RS485 or RS232 serial input on the control
equipment or a PC, or alternatively, to an Edwards controller such as a TIC (Turbo Instrument Controller) or TAG
(Turbo & Active controller).
9.2
Technical data
For full details of the Logic interface technical data, refer to the nXDS pump instruction manual A735-01-880,
Section 2.
9.3
Installation
Ensure the pump is switched off before fitting. Secure the cable using the retaining screws incorporated in the D-
type connector.
Table 16 - Ordering information
Product description
Ordering information
1 m cable
D395-00-835
2 m cable
D395-00-836
5 m cable
D395-00-837
Table 17 - Checklist of components
Qty
Description
Check (
)
1
Control cable