© Edwards Limited 2014. All rights reserved.
Page 3
Edwards and the Edwards logo are trademarks of Edwards Limited.
Introduction
A311-03-880 Issue A
Figure 1 - Components of the HV8000 pump: key
1. Oil filler plug (non-drive end cover)
2. Identification and rating plate
3. Lifting bolts
4. Inlet
5. Shaft-seals oil reservoir
6. Oil filler plug (drive end cover)
7. Drive-end cover
8. Motor
9. Direct drive coupling
10. Oil-level sight-glass (drive end cover)
11. Drive end oil drain plug
12. Earth (ground) stud
13. Mounting feet
14. Outlet
15. Non-drive end oil drain plug
16. Oil-level sight-glass (non-drive end cover)
17. Non-drive end cover
18. Drive shaft
19. Cooling-water outlet
20. Cooling-water inlet
21. Maximum oil level
22. Minimum oil level
A. Side view: HV8000VF pump with motor
B. Side view: bareshaft HV8000VF pump
C. End view: bareshaft HV8000VF pump
D. Cooling-water connections
E. Oil-level sight-glasses
Note:
Refer to
for the mounting feet configurations of the pumps.
