Edwards 9773512584, Instruction Manual

Page: 126 / 180

NR in the data part of a parameter indicates no reading.
NP in the data part of a parameter indicates a parameter that is not present.
9.4.1 Normal menu
This menu is displayed when the PDT is first plugged into the pump, or accessed by
pressing the NORMAL button. Up to four parameters are displayed. Scroll by pressing
the UP/DOWN keys.
Table 29 Normal menu
Description
Typical display
Serial Number S/N 1234567
Control Holder NONE IN CONTROL
Dry Pump current DP CURRENT 1.1 A
Booster current MB CURRENT 1.1 A
By default, the four parameters displayed in the normal menu are as shown in Table:
Normal menu . It is possible to change the parameters displayed, refer to How to set up
the PDT display on page 133.
9.4.2 Status menu
Press the STATUS button to enter. Scroll by pressing the UP/DOWN keys. Press CANCEL to
exit back to the Normal menu.
If a device is not fitted the associated parameters will not be displayed. Parameters
displayed:
Table 30
Typical display
Description
Typical display
Serial number S/N 1234567
Control holder NONE IN CONTROL
Dry pump current DP CURRENT 1.1 A
Booster current MB CURRENT 1.1 A
Green mode state Green Mode STATE Off
Inlet isolation valve open/closed state ISOL VALVE Open
Dry pump stator reference temperature TCS REF 100 C
Dry pump temperature DP TEMP 100 C
Dry pump exhaust stage temperature DP EXH STG 63 C
Dry pump end cover temperature DP E/C TEMP 100 C
Booster temperature MB TEMP 100 C
Booster end cover temperature MB EC TEMP 100 C
Nitrogen flow switch status N2 Supply OK
Dry pump power DP POWER 1.1 kW
Booster power MB POWER 1.1 kW
Dry pump speed in percent DP SPEED 100 %
Page 122
M58800880_H - Pump display terminal