8
1
Battery Installation Instructions
1. Use a screw driver to remove the battery-door screw.
Then pull out the battery compartment.
2. Install two AAA batteries following the diagram.
• Do not use rechargeable batteries.
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard
(carbon zinc) or rechargeable (nickel-cadmium).
• Do not recharge nonrechargeable batteries.
• Remove rechargeable batteries from the MoonScope
before recharging.
• Only charge rechargeable batteries under adult supervision.
• Only use batteries of the same or equivalent type as recommended.
• Insert batteries with the correct polarity.
• Remove exhausted batteries from the unit.
• Do not short circuit the supply terminals.
• To prevent corrosion and possible damage to the product, we recommend
removing the batteries from the unit if it will not be used for more than two weeks.
• For best results, always use fresh alkaline batteries. Other battery types will have
a shorter life.
3. Replace the cover and tighten the screw. Do not overtighten.
Developed in Southern California by Educational Insights.
© Educational Insights, Gardena, CA (U.S.A.). All rights reserved.
Learning Resources Ltd., Bergen Way, King’s Lynn, Norfolk,
PE30 2JG, UK. Please retain this package. Made in China.
www.educationalinsights.com
8
