4
6.
If the flow sensor is not automatically identified
then click the “Search for sensors” icon to find
the sensor.
7.
Click on the “On-line experiment” button; this
will open a graph below.
8.
Click on the “Module setup” button located on
the flow sensor icon in the module window to
change the sensor settings if need be.
9.
Click on the "experiment set up" button to change
the experiment settings if need be (experiment
duration for example).
10.
The flow sensor will give a live reading in the
box to the left of the screen while plugged in.
11.
To run an experiment and collect data click “Run
experiment”.
12.
To end data collection early, click “Stop
experiment”.
Tablet, smart phone device
Materials needed:
900-234 Flow Sensor
900-268 WIFI module
900-215 Battery
Your flow sensor needs to be connected to a 900-268
module. The 900-268 module will create a closed
Edu-Logger WiFi network which will stream the Edu-
Logger data to a device of your choosing. Once your
device is wirelessly connected to the Edu-Logger
network you can run experiments and collect data
through a browser of your choosing.
Procedure:
1.
Connect the flow sensor directly to the left side
900-268 (no wires required).
