Edu-Logger 900-234, Manual

Page: 3 / 12

3

Connect the probe to a ruler and submerge
directly into water (river for instance) to take
flow measurements.
Quick start procedure:
PC or Mac Computer
Materials needed:

900-234 Flow Sensor

900-213 USB Module

USB to mini USB cable (included with the 900-
213 module)
Your flow sensor needs to be connected to a 900-213
module. The 900-213 module then connects to a
computer via a USB to mini-USB cable. Please note
that you cannot plug the flow sensor directly into the
computer.
Resident PC software and browser based application
can be downloaded for free at
www.edulab.com as
well as a full software user guide.
Note: Make sure not to download and install both
types of software they will conflict on the computer.
Procedure:
1.
Install the Edu-Logger software
2. Connect the 900-213 module to the PC or Mac
3. Connect the flow sensor to the 900-213 module
(they directly plug together). Please note there is
no calibration required for this sensor.
4. Open the Edu-Logger software.
5. Once a flow sensor logo appears on the left side
of the screen the probe has been automatically
identified and you can begin experimentation.