4
5.
Once a magnetic field sensor logo appears on the
left side of the screen the probe has been
automatically identified and you can begin
experimentation.
6.
If the magnetic field sensor is not automatically
identified then click the “Search for sensors” icon
to find the sensor.
7.
Click on the “On-line experiment” button; this
will open a graph below.
8.
Click on the “Module setup” button located on
the magnetic field sensor icon in the module
window to change the sensor settings if need be.
9.
Click on the "experiment set up" button to change
the experiment settings if need be (experiment
duration for example).
10.
The magnetic field sensor will give a live reading
in the box to the left of the screen while plugged
in.
11.
To run an experiment and collect data click “Run
experiment”.
12.
To end data collection early, click “Stop
experiment”.
Tablet, smart phone device
Materials needed:
900-224 Magnetic Field Sensor
900-268 WiFi module
900-215 Battery
Your magnetic field sensor needs to be connected to a
900-268 module. The 900-268 module will create a
closed Edu-Logger WiFi network which will stream
the Edu-Logger data to a device of your choosing.
Once your device is wirelessly connected to the Edu-
Logger network you can run experiments and collect
data through a browser of your choosing.
