E D R O
D
y n a
W
a s h
®
T
h r e e
P
o c k e T
W
a s h e r
- e
x T r a c T o r s
71
Unloading (Clean or Unload Side) Operations.
1.
Wait for the Soiled side operator to enable Clean side operations. The door lock
on the Clean side door is released and the door can be opened during a 10
second interval each time the door opening button on the control panel at the
Soiled side is pushed.
2.
With the door lock released, open the access door by pushing in on the door
handle.
3.
If machine is equipped with Auto Index press and hold the “JOG” and “INDEX”
buttons at the same time to align a pocket. Press the “JOG” button and
“FORWARD” or “REVERSE” buttons to correct any misalignment. If not equpped
with Auto Index then just press “JOG” and “FORWARD” or “REVERSE” to align
pockets.
4.
Open the pocket door, and unload the pocket. Close the pocket door.
5.
Repeat steps 3 and 4 until all three pockets in the machine are unloaded.
6.
Close the access door. This will allow the Soiled side operator to regain control of
the load side door and to run another wash program.
NOTE
Clean side door status is monitored by the touch screen control.
