manualshive.com logo in svg

EDP i-BOX, Installation & User Manual

Share
Download
EDP i-BOX Installation & User Manual Download Page 28

Installation & User Guide

i-BOX Installation And User Guide_V4.2.6

Page 28 of 57

The Test Wizard will now configure the card format, cardholder, access point and download the data to the
controller. Select

Next

to continue.

Now the Test Wizard will complete a number of hardware tests – please follow the on-screen prompts.

Unlock Door – presenting your card to the reader once will unlock the door, the controller LED should

stay on green for 5 seconds

High Security Mode – presenting your card to the reader 4 times will test the high security mode, the

controller LED will flash 4 times red every 5 seconds

Normal Mode – presenting your card to the reader again 4 times will put the system back to normal

mode, the controller LED flashes green every 5 seconds

Door Latched Open – presenting your card to the reader twice will latch the door open, the controller

LED will flash green twice every 5 seconds

Door Locked – presenting your card to the reader twice again will lock the door, the controller LED

flashes green every 5 seconds.

Select

Next

to continue.

Kalkenstraat 91-93  B-8800 Roeselare (Roulers) - Belgium

Tel. +32(0)51/25.06.10  Fax +32(0)51/24.02.57

Email: [email protected] website: www.rack19.be or www.eldeco.be or www.eldeco-edp.eu

Summary of Contents for i-BOX


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands