manualshive.com logo in svg

EDP i-BOX, Installation & User Manual

Share
Download
EDP i-BOX Installation & User Manual Download Page 26

Installation & User Guide

i-BOX Installation And User Guide_V4.2.6

Page 26 of 57

Transaction Screen

All system transactions are displayed on the main screen with time and date stamp. A detailed description is
given for each transaction e.g. No access, invalid PIN code. For diagnostic and security purposes, the
transaction screen can be cleared, by double clicking within the window. The transaction pause button will
temporarily freeze the screen without losing any data. Transactions will continue to be registered in the log file.
The date and time column can be shortened or extended by clicking on the column header. If a large number of
transactions are logged, the date field can be hidden to extend the length of the field. All system transactions are
colour-coded, valid entries are displayed in green, access denied transactions etc in red and system messages
in yellow.

The number of transactions kept in memory for quick overview on the main screen can be set under “System
Settings”. The larger the number, the more memory will be required. Transactions are always stored and can be
viewed or printed under “Reports”.

Save on Exit

Preferences selected are automatically saved. Under General Settings, a factory default button restores all the
important system settings. If any system or card changes have been made, the system will ask whether you wish
to backup the data when exiting the program.

Test Wizard

The test wizard can be selected from the Tools drop-down list on the top menu bar.

The test wizard will guide you through automatic setup of the card formats and a complete hardware and
software test.

Kalkenstraat 91-93  B-8800 Roeselare (Roulers) - Belgium

Tel. +32(0)51/25.06.10  Fax +32(0)51/24.02.57

Email: [email protected] website: www.rack19.be or www.eldeco.be or www.eldeco-edp.eu

Summary of Contents for i-BOX


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands