on the screen and STND-BY mode is set at 80
℃
.
2. When machine is in mode, machine condition
wouldn’t work. Press the button and
it will revert to the previous working.
3. When the machine runs, you can’t change it to the
the machine to the mode.
1. When press button the present numbers of
length and papers laminated will be shown on
the screen.
2. When you want to return to working mode,
Press button again.
3.Also, you can reset measure mode by pressing
button.(for 2 second)
mode.
In this case, press the button and turn
***Check the laminating length & How many laminated papers***
***STND-BY (Saving Electricity while you are not operating for a while)***
1. When press button will display
ST/BY
STOP
ST/BY
ST/BY
ST/BY
MEANS
RESET
FAN
MEANS
MEANS
RESET
- 17 -
EDNord - Istedgade 37A - 9000 AAlborg - telefon 96333500
