EDNord QMS magicolor 2, Getting Started

Page: 31 / 96

Loading the
Media Cassette
2-15 Setting Up Your Printer
Loading the Media Cassette
Prepare the Paper
1 Take a stack of about 250 sheets (½ ream).
» Note:
Don’t unpack the media above the printer as this might
cause media particles to fall into the printer.
2 Holding the stack with one hand, fan the sheets with the
other hand.
This gets air through the sheets and prevents static buildup.
3 Take off the top and bottom sheets.
These sheets sometimes have residual glue buildup that could
cause a media jam.
Load the Cassette
1 Remove the media cassette from the printer.
2 Adjust the media guides to fit the size paper you’re loading.
Squeeze the retainers at the ends of the left width guide and/or
the length guide, move the guide to the appropriate location
(media sizes are listed on the cassette), and release the retainers.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500