En-23
E
nglis
h
Testing the Printer
Perform the following procedure to print a configuration page and see if the printer
is working correctly.
1
After connecting the printer to a power outlet, press the power switch to turn it
on.
Turning on the printer causes all the indicators on the control panel to light, which indi-
cates that the printer is warming up. In about 23 seconds or less, only the Ready indica-
tor remains lit, indicating that the printer is ready to print.
2
Place the A4 size paper onto Tray1.
3
Make sure that both the Paper and Error indicators are off, and the Ready indica-
tor is on. This indicates there is no existing error condition and no data remaining
to be printed.
4
Briefly press the panel button to start the configuration page print operation.
Note
• See “Troubleshooting” in the
User’s Manual
(CD-ROM)
for information on what to do if
the configuration page does not print when you press the panel button.
Panel button
Step 4
PP1100.book Page 23 Wednesday, March 14, 2001 2:37 PM
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
