39
Mistral 1600 HR
To set-up the speed, the light (
e
) must
be off. if not, press (
g
).
Adjust the speed of the rollers by pres-
sing the and keys (
j
) of the
control panel.
The last value entered automatically
replaces the previous stored value.
REVERSE
STOP
SPEED
1 2 3 4 5
1 2 3 4 5
6 7 8 910
FORWARD
PRESSURE
POWER
c
f
h
d
e
g
i
j
k
In the packing, you will find a comple-
te start-up kit containing :
The start-up kit
1-5
Speed programming
2-2
- One roller of assembly film
(double-sided).
- Two rollers of cold adhesive film.
S
PEED AND TEMPERATURE OF THE ROLLERS PROGRAMMING
2
Automatic stand-by of the Mistral 2000 HR
2-1
The programs M1, M2, M3 and M4 can be selected by the operator.
To activate a program, press or (
a
) buttons successively until the light
corresponding to the required program comes on.
MODE
The light (
k
) indicates that the
machine has been automatically swit-
ched to stand-by after 30 mn of non-
use. The stand-by temperature can be
set in the range 20-60°C. The rollers
diverge automatically.
*Press (
n
) to stand-by manually
the roller heating.
Mistral 2000 HR
1-4
The Mistral 2000 HR is delivered
positioning on the support unit.
Hold the machine by the carrying
handles in order to move it.
Break the Mistral 2000 HR from the
palette. Hold the machine by the car-
rying handles, move it in order to put a
side on the ground, and then the sec-
ond side.
1
*Press successively (
a
) until the light corresponds to (
n
) , to stand-by manually the roller heating.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 9633 3500