Setup the Connection between the Receiver and the Mouse,
Keyboard.
1. Plug the RF receiver into the USB port of your computer.
2. Insert the batteries into the mouse and keyboard, then follow the steps below.
3. If the mouse or the keyboard is not working, please put them into pair mode.
4. Pairing: Re-plug the receiver into the USB port of your computer, then press connect button of the moue and
keyboard. If the mouse or keyboard does not work after 10 seconds, pair them again. (The receiver has auto pairing
function).
5. The LED indicator on receiver flashes when the mouse is moving or when the keyboard is in use.
6. When the battery of the keyboard or the mouse is low, the Low Power indicator would blink.
Low Battery &
Pairing indicator
Scrolling Wheel &
Low Battery /
Pairing indicator
LED Indicator
When connecting
Power ON
*Keyboard Indicator
Red LED ON 10 sec.
Red LED Blinking
Pairing (LED OFF when paired or
failed after 10 sec.)
Red LED Blinking 10 sec.
Low Battery Warning
Power ON
*Receiver Indicator
Green LED ON 3 sec.
Green LED Blinking
(If any action)
Red LED Blinking 10 sec.
Low Battery Warning
Red LED ON 10 sec.
Power ON
Red LED Blinking
Pairing (LED OFF when paired or
failed after 10 sec.)