CMP375 Series
CMP375 Series – Rev. 1.1, Issue 11/07 Page 9 of 12
User's Manual
CONTROL PINS SPECIFICATION
GROUND (KL31)
The GROUND signal is directly
connected to the chassis ground
(Vehicle's ground) as showed.
CAN BUS
The CAN interface has the following
characteristics:
•
CAN V2.0B,
•
Fully isolated from battery
pack potential (SELV)
•
No terminating resistor
ENABLE
The Enable signal puts the charger in
Connected Charging state (DC output
On).
ALARM
LINE PRESENT
CHARGER CONNECTED, D02
Four Open Drain Outputs connect to
GROUND; Imax = 1 amp.
Alarm
indicates when a charger's fault
is detected.
Line Present
indicates when mains
AC input is more that 80Vac.
Charger Connected
signal indicates
when an EVSE Charge Connector is
detected.
EDN GROUP S.r.l.
Via Mazzini, 10/12 – 20032 – CORMANO (MI) ITALY – TEL. +39 02 66305120 FAX +39 02 61540938
CONSULT TECHNICAL SALES FOR MORE DETAILED DATA SHEETS OR TECHNICAL MANUAL
