CMP375 Series
CMP375 Series – Rev. 1.1, Issue 11/07 Page 8 of 12
User's Manual
nector manuf
CONNECTOR SPECIFICATION
CONNECTORS DATA
Id
Function
Mate connector
J1
Main input connector
Brand: VAN-SYSTEM Code: CVB06AC 22-22S CR F7
J2
Control I/O connector
Brand: VAN-SYSTEM Code: CVB06AC 20-A48S CR F7
J3
Power Output connector
Brand: VAN-SYSTEM Code: CVB06AC 20-4S CR F7
PINS DATA: Main Input (J1) :
PIN
Function
J1772 AC level 1, 2 conductive coupler
A
AC POWER (L1)
Mains power *
B
CONTROL PILOT
Primary control conductor *
C
PROXIMITY DETECTION
Primary detection conductor to detect presence of charge connector *
D
AC POWER (L2, N)
Mains power *
*
CHASSIS GROUND / POWER HEART (P.E.) CONNECTION - EVSE equipment grounding conductor to EV chassis ground is located on the connectors side of the enclosure
PINS DATA: Control I/O (J2) :
PIN
Function
A
ALARM
Open Drain, active low, 24V, 1A
B
LINE PRESENT
Open Drain, active low, 24V, 1A
C
IGNITION RUN (KL15)
8...16 volts
D
CHARGER CONNECTED
Open Drain, active low, 24V, 1A
E
DO2 (Programmable)
Open Drain, active low, 24V, 1A
F
FAN- (V03)
24V, 1A
G
FAN+ (V03)
24V, 1A
H
BMS WAKE-UP (V02)
12V, 0,1A
J
CONNECTION CONTROL LOOP (connect to pin T to START)
5V, 5mA
K
ENABLE (OPEN = ON)
5V, 5mA
L
GROUND (KL31)
Connected to Charger Chassis groud stud
M
LV Always Hot Power Battery (KL30)
8...16 volts
N
CAN LOW
5V, V2.0B
P
GROUND (KL31)
Connected to Charger Chassis groud stud
R
NOT CONNECTED
-
S
GROUND (KL31)
Connected to Charger Chassis groud stud
T
CONNECTION CONTROL LOOP (connect to pin J to START)
5V, 5mA
U
CAN HIGH
5V, V2.0B
V
CAN Shield
Connected to Charger Chassis groud stud
PINS DATA: Power Output (J3) :
PIN
Function
A
INTERLOOK CONNECTION (connect to pin C for START)
5V, 5mA
B
NEGATIVE POWER OUTPUT
C
INTERLOOK CONNECTION (connect to pin A for START)
5V, 5mA
D
POSITIVE POWER OUTPUT
EDN GROUP S.r.l.
Via Mazzini, 10/12 – 20032 – CORMANO (MI) ITALY – TEL. +39 02 66305120 FAX +39 02 61540938
CONSULT TECHNICAL SALES FOR MORE DETAILED DATA SHEETS OR TECHNICAL MANUAL
