Edmonds AiroMatic, Product Manual, Page: 3 / 20

3
Important Notes

The Airomatic is designed for general household ventilation only. DO
NOT use to exhaust hazardous or explosive materials and vapours

The Airomatic has an unguarded fan assembly. DO NOT use in locations
readily accessible to people or animals. The fan is intended for use
facing an unoccupied space only.

Always use the provided power supply and speed controller to power
the fan. Failure to do so can damage the product.

Power supply and speed controller are for dry indoor use only. Ensure
that the power supply and speed controller are not left on damp
surfaces, fasten to the structure with screws or cable ties as required.

Only use one Airomatic per speed controller and power supply
Important Notices and Warnings
WARNING: Do not proceed with the installation until you have read the
entire instructions, including these warnings.
Install at your own risk
The installation of this product may be dangerous and includes the potential
of death, personal injury or property damage. Please be aware of the following
before installing this product.

Installation requires climbing and working at heights. Use caution to
minimise risks by:

Clearing the area below the workspace

Avoid walking on surfaces that are slippery, wet or dusty

Using appropriate equipment (tie off ladders etc.)

There are sharp edges on the flashing, Take care and wear appropriate
personal protective equipment when handling and installing products

DO NOT attempt to install if you are uncomfortable with working at
heights or on sloping roof surfaces