7)
For convenience you may unhook the Vanity unit from the wall, after marking the holes positions. Make the holes
with the drilling machine, where previously indicated with the pencil, insert the appropriate supplied dowels in
the wall-holes and adjust the supporting brackets, turning the screws.
8)
Replace the Vanity unit to its original position.
9)
Silicone the upper edges of the furniture, then lay down the top exactly corresponding the center of the Vanity
unit.
10)
Before you install the drawers, pull out the side guides and lay the drawer on them. Close it, until the drawer is
approached to the sides. At this moment you will hear a click, which means the right automatic lock of the drawer
to the guides.
Page. 5
