INSTRUCTION AND
SECURITY MANUAL
MAJ - 05/18
Insert the 1 m (3,28 Ft) extension in the frame and lock it in the selected hole with the
removable pin.
The extension has 3 different height positions : 3,50 m (11,48 Ft), 4 m (13,12 Ft) and
4,50 m (14,76 Ft).
Insert the top rack in the extension base and
fix it with the 68 mm (2
5/8’’
)screw and nut.
Assemble the arms with
the two 43 mm (1
3/4’’
)
screws and nuts, using a
13 mm (1/2”) flat wrench
and a 6 mm (1/4”) hex
wrench. Make the arms
marks match :
R with R and L with L.
Insert the arms in the top rack according to the position
selected. When you are in front of the steering wheel, put the
R arm on your right and the L arm on your left. The retractable
pins must be locked in the corresponding holes.
Follow the marks on the arms to select the appropriate width :
Mark 1 (without T-arms tubes) – Distance between axes : 2.3 m (7.55 Ft).
Mark 2 (with T-arms tubes) – Distance between axes : 2.8 m (9.19 Ft).
Mark 3 (with T-arms tubes) – Distance between axes : 3.6 m (11.81 Ft).
Mark 4 (with T-arms tubes) – Distance between axes : 4.3 m (14.11 Ft).
Mark 5 (with T-arms tubes) – Distance between axes : 4.88 m (16.01 Ft).
There are 5 different positions to adjust the arms width.
Distance between axes
Fix the power drill support base to the main body with the 2
provided screws and tighten the wing nuts to lock the support
base.
3,50 m (11,48 Ft)
4 m (13,12 Ft)
4,50 m (14,76 Ft)
4
5
6
7
8
Ref. 267455
