INSTRUCTION AND
SECURITY MANUAL
MAJ - 05/18
CABLE REPLACEMENT
a
b
1
1
3
5
3
2
2
4
4
5
Unscrew the axis maintaining the pulley and remove
it with a 17 mm (11/16”) flat wrench and an 8 mm
(5/16”) hex wrench.
Put the axis through the cable loop to fix it to the
internal tube.
Remove the pulley.
Unscrew the screw from the
main body with a 5 mm (3/16”)
hex wrench, in order to
remove the cable completely.
Put the pulley back to its location.
Pull the internal tube out.
Fix the opposite cable loop to the main body with
the provided screw.
U n s c r e w
the nut from
the axis
m a i n t a i n i n g
the cable to
the main body.
Use a 10 mm
(3/8”)
flat
wrench and a 5
mm (3/16”) hex
wrench.
Put the principal tube back in the main
body.
Put the axis maintaining the pulley back
and tighten the nut on the axis with a
17 mm (11/16”) flat wrench and an 8 mm
(5/16”) hex wrench.
For this step, the internal tube must not
be completely inserted in the frame.
NECESSARY TOOLS : 10 (3/8”) and 17 mm (11/16”) flat wrench, 5 (3/16”) and 8 mm (5/16”) hex wrench
WITHDRAWAL OF USED CABLE
NEW CABLE INSTALLATION
Ref. 267455
