PhaseTrakker
AP30
Setting Up the Field Unit
13
Setting Phase Angles
The phase angles displayed can be represented by different values that can be
selected by the user. The 1
st
Phase is always 0
°
, while the 2
nd
and 3
rd
Phases can
be assigned different angle values according to desired preference. The phases
are listed from top to bottom in time sequence order: 1
st
, 2
nd
, and 3
rd
. The verti-
cal order in the choices displayed reflects the order that will be displayed on the
Read screen.
The Phase Angles choice can be changed at any time. A change to the Phase
Angles preference automatically applies to all the stored records on the Field
Unit.
Updating the Preferred Roaming List (Optional)
For Field Units equipped with a Verizon Wireless network device, a recom-
mended step is to update the Preferred Roaming List (PRL). This step must be
performed in a Verizon Wireless home area with adequate signal strength. It is
recommended that the PRL be updated in the area the Field Unit will be used,
and can be updated anytime to ensure optimal performance.
The Update PRL button will not appear for AT&T Wireless network devices, if the
device is roaming, or if the signal strength is too low. After initiating the update,
the Field Unit should be left undisturbed for 3 minutes. The status of the update is
indicated on the Network Status screen. If an update fails, repeat the process.
