3-1
Introduction
In this section you are given step-by-step instructions on how to install
your Editor. We recommend that you read all instructions thoroughly at
least once before doing them. The section includes:
■
Things to consider when selecting a work space
■
Information on cables
■
The physical installation of the Editor
■
A start-up/power on procedure
The Work Space
The following is a synopsis of work space considerations when installing
your Editor. For more complete information, consult the appropriate
Installation Planning Guide. The Computing Chassis for your Editor is
designed such that it may either be mounted in a standard 19" electronic
equipment rack or placed on a level desk or table top. This, along with
room for the Keyboard, are considerations in determining the work space.
Other considerations are:
■
The proximity of electrical outlets. (The power cord for the
Computing Chassis is 6' long.)
■
Signal cables are 16 meters (approximately 52') long.
■
Routing of power cords and signal cables so that they do not
present a hazard to personnel.
3
Installing The Editor
