F-1
Appendix F: System Software Installation
Introduction
This appendix provides detailed instructions on how to install Super
Edit™ software. It is provided here in the event that your Editor fails to
boot up when it is turned on. That is, the Main Menu as described in
Section 3, Turning Power On, does not appear. Or these instructions may
be used in the event the program crashes.
Installing System Software
Note that Super Edit™ is on two (2) Floppy Disks.
The procedure to initially install Super Edit™ software is as follows:
1. Insure that the WRITE ENABLE/DISABLE tabs on the disks are in
the WRITE ENABLE (down or closed) position.
NOTE:
Upon receipt of the Super Edit™ software, it is recommended that the
UTILITIES, and PROGRAM disks be duplicated for your software library
archives.
2. From the Main Menu, press
[
←
]
until the RT prompt (RT>) appears.
3. Insert the floppy disk labeled UTILITIES into the DFØ Floppy Disk
drive (the slot on the right).
Appendix F: System
Software Installation
