23
Parental Control
You can set a password for anyone who wishes to operate in the “Installation” menu. And you can also set
the password for the lock channels. (How to set the lock channel please refer to LOCK) Here will show you
how to setting and how to revising the password.
1
In “Parental Lock” function, press [OK] key, there will pop a dialogue for you to input the password.
When you input the correct password, you will see a screen like below:
2
Menu Lock determining that when user wishes to enter “Installation” menu, whether have to input
Password or not. If the setting of “Menu Lock” is “On” which means user have to key in password,
set “Off” means unlock.
3
Channel Lock determining that when user wishes to play the lock channels, whether have to input
the password or not. If the setting is “On”, play the channels with lock mark will show up a dialogue
on the screen and ask for the password. If the setting of “Channel Lock ”is “Off”, the Lock function
will invalid.
4
New Password is used for revising password; you can input the new password in this item by using
number keys directly. After you filled in 4 digital numbers, the highlight will auto skip to Confirm
Password and ask you to input the new password again. If the password is correct, the screen will
show up a message of “Saving Data, Please Wait…” After finish saving and drawback to “System
Setup” menu, the revising is complete.
5
Press [Menu] key to draw back from the “Parental Lock” menu.
Factory setting
Use the up/down arrow buttons
to select one of the following
menu items and press the
OK
button
.
Functions and settings in the menu:
Factory setting:
Use of this function deletes ALL user programmed values and reinstalls factory
settings. After selecting with the OK button, enter the PIN code (as a rule 0000).
A warning window appears afterwards.
Delete all channels:
The channel lists are deleted here.
Save as factory setting:
The current configuration can be specified here as factory setting.
Exit the ‘Factory Setting’ menu by pressing the
EXIT button.
Note:
The ‘USB’ menu is only accessible if a suitable USB memory device is plugged in and recognised by
the receiver.