20
Version of 14 June 2016
Date:
This item can only be reached when the ‘Off’ option was set for the ‘GMT User’ item. Enter the date
via the number buttons.
Time:
This item can only be reached when the ‘Off’ option was set for the ‘GMT User’ item. Enter the time
via the number buttons.
Time display:
Specify whether (On) or not (Off) the time should be displayed in the front display of the
receiver.
Exit the ‘Time Settings’ menu by pressing the
EXIT button
.
Timer
Up to 8 time-based events can
be programmed in this menu.
In addition to programming
recordings of Radio or TV
channels, it is also possible to
display events, such as a nice
birthday or anniversary greeting
at a certain time or specify to
which channel to be woken
up. Information on recordings
can also be found in section
EDIVISION.
Functions and settings in the
menu:
Timer number: Calling up the timer menu automatically switches to the next (available) programmable timer.
Use the left/right arrow buttons or OK button and the up/down arrow
buttons to switch between (programmed) timers.
Timer mode:
Set the recording mode here. Choose whether the recording is carried
out once, daily, weekly or monthly.
Timer service:
Specify a service here. Select the item ‘Recording TV Channel’ or
‘Recording Radio Channel’ for recordings. If wanting to be woken with
a specific channel, select the ‘TC Channel’ or ‘Radio Channel’ here.
Select the ‘Message’ input if wanting to display a message on the
screen at a certain time. Wake-up message: This item only appears
when coming across the ‘Message’ setting in the previous item. This
allows to choose between ‘Birthday’, Anniversary’ or ‘General’.
Station:
This item does NOT appear when coming across the ‘Message’
setting in the ‘Timer Service’ item. Otherwise, set the channel here to
be recorded or to which to be woken up.
Date:
Set the (start) date of the recording here.
Start time:
Set the start time here.
Duration:
This item is only changeable if the ‘Recording TV Channel’ value or
‘Recording Radio Channel’ value was set at the ‘Timer Service’ item.
Then set the duration of the recording here (recording length).
Standby at the end:
This item is only changeable if the ‘Recording TV Channel’ value or
‘Recording Radio Channel’ value was set at the ‘Timer Service’ item. It
is then possible to determine whether the receiver should switch into
standby mode after recording.
Exit the timer menu with the
EXIT button
. After making changes and wanting to keep them, confirm with
‘Yes’ in the appearing dialogue window.
Note:
An error message appears under certain circumstances. As a rule, an incorrect start time or start date
was given. Check the information!
Note:
A recording is only possible if a compatible USB memory device is connected to the receiver.
Note:
A list of all programmed Timers can be found as follows: Press the EDIVISION button in the TV mode
and then the yellow button, and then select ‘Timer List’ in the appearing menu window.
