Page 25
Auto installation
Select this item to install satellites and channels automatically with pre-set parameters. The receiver
thereby searches first in the first step for possible satellites and in the second step (provided satellites
were found with sufficient signal strength) for channels in order to include them in the program list.
Exit the 'Auto Installation' menu with the
EXIT button
. With this button, the installation process can
also be cancelled at any time.
Satellite guide
This menu item can help setting up the receiving system by entering the geographical data of the
location of the satellite system.
Functions and settings in the menu:
Local length:
Set the value here for the longitude of the location where the receiving system is
located.
Local latitude:
Set the value here for the latitude of the location where the receiving system is
located.
Calculate:
Navigate the cursor with the arrow buttons to this field and press the
OK button
.
The setting data of the antennas are calculated and displayed as 2 graphics.
Exit the 'Satellite Guides' menu by pressing the
EXIT button
.
